ICTNWK305 Install And Manage Network Protocols Knowledge Assessment

Knowledge Assessment


Unit code, name and release number

ICTNWK305 – Install and manage network protocols (1)

Qualification/Course code, name and release number

ICT30118 - Certificate III in Information, Digital Media and Technology (2)

Assessment instructions

Table 1 Assessment instructions

Assessment details


Assessment overview

The objective of this assessment is to assess your knowledge as would be required to install and manage network protocols.

Assessment Event number

1 of 2

Instructions for this assessment

This is a written assessment and it will be assessing you on your knowledge of the unit.

This assessment is in four parts:

1.      Network protocol chart

2.      Design an IP addressing scheme

3.      Fill in the blanks

4.      Short answer

This assessment is supported by:

·         Assessment feedback

Submission instructions

When you have completed your assessment, submit it online for marking by your assessor.

It is important that you keep a copy of all electronic and hardcopy assessments submitted to TAFE and complete the assessment declaration when submitting the assessment.

What do I need to do to achieve a satisfactory result?

To achieve a satisfactory result for this assessment all questions must be answered correctly.

What do I need to provide?

·         Computer, internet and login details

·         USB drive or other storage method with enough free space to save work to.

What the assessor will provide?

Access to the Learning Management System.

Due date and time allowed

Indicative time to complete assessment:

·         1.5 hours (90 minutes)


Your assessor may ask for additional evidence to verify the authenticity of your submission and confirm that the assessment task was completed by you.

Reasonable adjustment

If you have a permanent or temporary condition that may prevent you from successfully completing the assessment event(s) in the way described, you should talk to your assessor about ‘reasonable adjustment’. This is the adjustment of the way you are assessed to take into account your condition, which must be approved BEFORE you attempt the assessment.

Assessment feedback, review or appeals

Appeals are addressed in accordance with Every Student’s Guide to Assessment in TAFE NSW.

Part 1: Network protocol chart (OSI and TCP/IP model)

Fill out the following OSI and TCP/IP model network protocol chart with the correct information. You must fill all the blank cells in columns A, B, C, D. Use the following terms to complete column D at the correct OSI layers. (Telnet, HTTP, FTP, IPv6, SMTP, TCP, POP3, UDP, DNS, DHCP, IPv4, TIA/EIA (RJ-45/T568), 802.11, Ethernet IEEE802.3, SSH).

Table 2 - Network Protocol Chart





OSI reference model

Layer number and name

Protocol data unit (PDU)

TCP / IP model

layer name

Protocols / Standards

Part 2: Design an IP addressing scheme

Scenario continued: You are given an IPv4 network address to be used when designing the IP addressing scheme. ABC Company requires four subnetworks to facilitate their department functions and management of the network.

  1. Identify the following information based on the given scenario.

Address class

Default subnet mask

Total number of subnets

Number of bits borrowed

Custom subnet mask

Number of usable host addresses per subnet

  1. Design a network addressing scheme that allows for four Record the following information given below for each subnet.

Subnet 0

Network address:

First usable host:

Last usable host:

Broadcast address:

Subnet 1

Network address:

First usable host:

Last usable host:

Broadcast address:

Subnet 2

Network address:

First usable host:

Last usable host:

Broadcast address:

Subnet 3

Network address:

First usable host:

Last usable host:

Broadcast address:

For assessor completion only:

Part 2

Satisfactory ☐

Unsatisfactory ☐

Part 3: Fill in the blanks

  1. Fill in the blanks with the correct network protocols and port numbers.


Port Number






67, 68

  1. Fill in the blanks, with the correct IPv4 first octet range and default subnet mask information according to the classful network architecture.

IPv4 class

First octet range

Default subnet mask


0 -






-          255


Part 4: Short answer

1. Summarise the features of the two major transmission control protocols and give an example of a use scenario for each.

  1. UDP
  2. TCP

2. Summarise the key features of the two major IP protocols.

  1. IPv4
  2. IPv6

3. Network protocols IPv4 and IPv6 would need to transcend (go beyond/scale with) organisational size and network complexity.Explain how you would allow for future growth of the organisation’s network and its complexity when designing IP addressing schemes.

Want latest solution of this assignment

Submit Your Assignment Here

AssignmentHippo Features

On Time Delivery

Our motto is deliver assignment on Time. Our Expert writers deliver quality assignments to the students.

Plagiarism Free Work

Get reliable and unique assignments by using our 100% plagiarism-free.

24 X 7 Live Help

Get connected 24*7 with our Live Chat support executives to receive instant solutions for your assignment.

Services For All Subjects

Get Help with all the subjects like: Programming, Accounting, Finance, Engineering, Law and Marketing.

Best Price Guarantee

Get premium service at a pocket-friendly rate at AssignmentHippo


  • Assignment Writing Guide
  • Essay Writing Guide
  • Dissertation Writing Guide
  • Research Paper Writing Guide


  • Accounts
  • Computer Science
  • Economics
  • Engineering

Client Review

I was struggling so hard to complete my marketing assignment on brand development when I decided to finally reach to the experts of this portal. They certainly deliver perfect consistency and the desired format. The content prepared by the experts of this platform was simply amazing. I definitely owe my grades to them.

Tap to Chat
Get instant assignment help